Libec NX-300C Carbon Fiber Tripod System with NH30 Head, Ground Spreader, Long Plate & Case

Libec NH30 Tripod System Overview

Smooth pan and tilt motion is made possible by the NX-300C Carbon Fiber Tripod System with NH30 motor, which can be attached to small camera equipment up to 22 lb for easy storage. Libec provides the following: Head, Ground Spreader, Long Plate & Case. The NX-300C system is equipped with the NH30 dual 75mm bowl/flat base video head, SP-1B ground spreader, Long Plate S balance plate, and RC-20 carry case.

A tripod with a flat mount is compatible, and the base of the head can accommodate the 75mm bowl. Among its features are continuous pan/tilting drag and counterbalance, a snap-on/off quick release plate, illuminated bubble level (UV light),and recessed pan bar. The Long Plate S is designed to accommodate larger and heavier cameras. The carbon fiber tripod is a two-stage design that weighs only 3.5 lb and can reach. The ground spreader installs at the base of the tripod to add stability to the rig. Carry case to store and transport the entire system.

Libec NH30. A video head with a pan handle and centered 75mm ball/flat base for delivering 2.2 lb payload.

Designed to hold small camera rigs up to 22 lb each, the NH30 is designed specifically for this purpose. The 75mm Ball/Flat Base Video Head with Pan Handle by Libec utilizes a single ball/flat mount. The tripod's base can be placed in a standard 75mm bowl or on ice with nutnut type screws (3/8"-16). You can use either a bowl mount or essentially any head you want, and you have both options.

With the addition of a snap-on/off camera plate that can be adjusted up to 1.2 " fore/aft, the NH30 head is equipped with 1/4 "-20 and 3/8"-16 camera mounting screws to ensure accurate balance. By adjusting the screw and positioning the locating pin, the camera can be directed towards the plate to achieve optimal balance. Upon camera adjustment, it features smooth movement through continuous counterbalance and pan/tilt drag controls. The side features 1/4 "-20 and 3/8 "-16 threads that can be used to attach various accessories such as a light, monitor, or extension arm.

With the NH30, one of the mounts comes with a pan handle that can be attached to either side of head, so it can fit on the right or left side. The bubble level, which is illuminated by LED, helps the camera to level out on uneven surfaces in low light conditions.

A 75mm bowl Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod.

Adding a durable and lightweight tripod to your camera setup is the Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl. Various fluid heads can be mounted on the new RT20C with a 75mm bowl fitting. Weighing only 3.5 lb, the carbon fiber legs are ultra-light.? The height of the legs varies between 14.6 and 60.6 inches, and they are made up of 2-stage legs that are secured by twist levers. You'll need to purchase rubber feet and a separate spreader for this tripod.

Libec RC-20. The Carrying Case for Tripods NX-100C and Nx-300C.

The Libec RC-20. Carrying Case can accommodate the tripod systems of Libec NX-100C and Nx-300C.

Construction.
Nylon, polyester, polypropene (including reinforcement), polyethylene, acetal plastic, and thermoplastic elastomer are the substances employed in manufacturing.
The addition of multiple materials results in greater wear, water, and rip resistance.
The tripod is easily inserted and removed with ease due to its soft, unpadded interior that prevents any scratches or damage.
Zipper closure.
Pockets.
A NX-100C or Nx-300C tripod system can be found in the large main organizer.
Zippered exterior slip pocket.
Open exterior slip pocket.
Carrying options.
Soft connecting carry handles.
Carry handles are positioned outside the center of the tripod system to ensure accurate load balance. The systems.
Attached, adjustable shoulder strap.
Approximately weighs more than one pound when fully packed. Note:
For TH-X, THER-Z, and NH10/NH30 Libec Long Sliding Plate S. Please call us for details. Please note: Heads.
To balance a heavier camera or camera setup with s longer lens on certain tripod heads, Libec's Long Sliding Plate S is designed to help. An aluminum-alloy plate measuring 9.4" long has a sliding range of 3.7". Libec TH-X, threshers — Goldfeer, Heinz Huit-Schmidt, and other head designs such as the Superspeed Jet 503 are also compatible with it.
Sliding Plate.
Measures 9.4 inches in length and has a sliding range of 3.7 inches. ".
Compatibility.
The Libec TH-X, THER-Z, and NH10 tubing models are all LiBEc. What is the difference between these carbonate minerals?
Select Manfrotto and Sachtler heads.
Aluminum Alloy.
Durable aluminum alloy construction.