Libec LX7 M Tripod With Pan and Tilt Fluid Head and Mid-Level Spreader

Libec LX7 Tripod System Overview
The Libec LX7. An aluminum tripod with a pan and tilt fluid head is what makes the M Tripod with Mid-Level Spreader and Pan and Tilt Fluid Head and Mid. Its highest point is 65.4 inches (81 cm) while its lowest point measures 32 inches (80.6 m). The device's super torque system allows you to follow every movement, allowing it to weigh up to 17.5 lb. The fluid head is equipped with a sliding plate that has /- 1.6".' It is 11.4 lb (5.2 kg) in its entirety. The LX7. It is possible for M to function in temperatures between -4 and +140°F (-20 and 60°C). Small to mid-sized DV/HD and semi-shoulder cameras are the most suitable options for this tripod.

• An aluminum tripod with a fluid pan and tilt head and centered mid-level spreader.
• Exceptional torque performance for ultimate control.
• Outstanding sturdiness and weight-point, reaching up to 17.5 lb.
• Has a slip-on structure (with an adjustable sliding range of +/- 1.6" (40mm)).
• Maximum height of 65.4 ".

Libec LX7 Tripod System Specs

Key Specs

Camera Mounting	1/4"-20 Screw with Locating Pin (Quick Release Plate)
Drag Control	No
Primary Material	Aluminum
Load Capacity	17.5 lb / 7.94 kg
Maximum Working Height	65.4" / 166 cm
Minimum Working Height	31.9" / 81 cm
Weight	11.4 lb / 5.2 kg

Head

Camera Mounting	1/4"-20 Screw with Locating Pin (Quick Release Plate)
Base Mount	75 mm Half Ball
Counter Balance	Fixed

Pan & Tilt

Drag Control	No
Vertical Tilt	+90° to -80°

Legs

Primary Material	Aluminum
Leg Sections	3
Independent Leg Spread	No

General

Load Capacity	17.5 lb / 7.94 kg
Maximum Working Height	65.4" / 166 cm
Center Column	No
Minimum Working Height	31.9" / 81 cm
Spreader Support	Mid-Level
Weight	11.4 lb / 5.2 kg