Libec HS-350 Tripod System with H35 Head, Ground Spreader & Case

Libec HS-350 Tripod System Overview

This HS-350. A compatible ground spreader, a 17.6 lb load capacity fluid head, and carries the Libec Tripod System to set it. With the intuitive manipulation of pan, tilt, and counterbalance, a highly personalized experience is possible. An aluminum tripod is designed to be both lightweight and sturdy.

Libec H35. The Video Head is equipped with a 75mm Ball and Flat Base, carrying the 17.6 pounds of video weight.

Easily add a fluid head to your tripod setup with the H35's versatile adjustment options. The video head with pan handle and a 75mm Ball and Flat Base is provided by Libec. It comes with a built-in pan handle, which facilitates moving it up and down or side-by-side. The ability to pan and tilt independently results in smooth and effortless movements. The H35 head can accommodate up to 176.1 lbs of weight and has an adjustable counterbalance range of 6.6 to 16.5 lb.

Your camera can be anchored with a 1/4 "-20 screw and locating pin, or you can use 3/8 "-16 and 1/4 inch-20 screws for additional attachment. Along with the head, there is a long sliding plate that has one 3/8 "-16 screw and one 1/4 "-20 screw. A bubble level illuminated by the light to maintain a balanced setup on tripod legs. Note: Manfrotto or Sachtler heads are both accepted by the H35.

Libec RT30B with 2-Stage aluminum tripod legs.

Featuring a 75mm bowl base, the Libec RT30B 2-Stage Aluminum Tripod Legs can carry up to 55 lb loads. The height of the population varies from 16 inches to 59.5 inches. The upper leg casing is made of aluminum, and the feet are spiked for use on uneven ground.

Libec SP-2B Ground Spreader.

The Libec SP-2B Ground Spreader takes the place of the SP-1B, which is a ground-level tripod spreader. Compared to its forerunner, the SP-2B is more robust and easier to handle than its predecessor, and can be used with the RT30B and RP40B tripod legs. It provides stability and floor protection by working on flat surfaces.'".

Libec Carrying Case.

The Libec RC-30. An RH-30 tripod head is attached to the Carrying Case (Black) of Libec RT-30, which is an unpadded, vinyl case. The handle or the adjustable shoulder strap is what it needs to carry.

• Construction.
• Non-padded vinyl.
• Zipper closure.
• Carrying options.
• Carry handle.
• Attached, adjustable shoulder strap.
• Is compatible with the Libec RT-30 tripod and RH-30 Tripod head.